Antistatic agent 163

Item	Indicator
Exterior	Colorless or light yellow transparent liquid
Pour point ℃	—3~3
Specific gravity (25 ℃) ℃	0.910~0.930
Viscosity (25 ° C)Mpa·s	100~150
Chroma（Hazen）	≤150
Moisture%	≤0.05
Tertiary amine%	≥95.0
Medium and equivalent	293-307
Primary and secondary amines%	＜2.0

Fourth, characteristics and uses
This product is a non-ionic surfactant, mainly used as antistatic agent for polyethylene, polypropylene and ABS plastics. During the polypropylene polymerization process, the activity of the polymer particles can be reduced, and the polymer can be prevented from sticking to the inner wall of the reactor and system equipment. When the device is turned on or stopped, it must be added to the system to prevent agglomeration at the bottom of the flash tank. . It plays an important role in stabilizing the process and safe production, and is an irreplaceable process additive.
As a non-ionic surfactant, it can be used as emulsifier, antistatic agent, rust inhibitor, wetting agent, dispersant, desizing agent, softener, and can be used in cosmetics, agricultural spray oils, herbicides, bactericidal Agents, dyes and pigments, lubricating cutting oils, metal processing, papermaking, paints, textiles, tanning, etc. As a liquid surfactant, it is more convenient to use than the commonly used solid surfactants and safer than liquid organic amines.

V. Signs, use, packaging, transportation, storage
1. Mark: The product name, net weight, gross weight, batch number, date of manufacture and name of the manufacturer are indicated on the outside of the packaging barrel.
2. Use: Wear latex gloves and protective masks.
3. Packaging: sealed with plastic-lined iron pail with a capacity of 200L. Net weight: 180Kg / barrel.
4. Transportation: According to the general requirements for transportation of combustible organic matter.

 

1. Identification of the substance / preparation and company

 

Trade name

Lujing 163

Substance Key: 2002

Identification of the company

Shandong Linyi Lujing Chemical Co., Ltd.

Address: Hengyuan Industrial Park

Linyi, Dezhou, Shandong Province

Post Code: 251500

Fax No.: +86 534 4362108

Emergency telephone number: +86 534 423 6796

e-mail: lj_zgm@126.com

Country emergency telephone number: +86 532 388 9090

+86 532 388 9191

2. Composition/information on ingredients

Chemical characterization

Chemical Name	%	CAS	EINECS
N-alkoxypropylamine ethoxylate derivatives	97	71786-60-2	276-014-8

Risk phrases:

R22, R34, R50 / 53

UN Hazard Codes

C

3. Hazards identification

Emergency overview

Harmful in contact with skin and if swallowed.

Causes burns.

Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Potential health effects

Eye: Causes burns.

May cause permanent damage if eye is not wash immediately.

Skin: Causes burns.

The effect may be delayed in onset for several hours.

Ingestion: Will cause corrosion and damage to the gastrointestinal tract.

Inhalation: Will probably cause severe irritation to respiratory tract.

Chronic: Not available.

Blood: Not available.

Nerves: Not available.

4. First aid measures

General information

Remove soiled or soaked clothing immediately.

Adhere to personal protective measures when giving first aid

Wash contaminated clothing before reuse.

In case of contact with skin

Remove contaminated clothing. Wash immediately with plenty of water for at least 15 minutes. Take for medical treatment. The effects may be delayed in onset for several hours.

In case of contact with eyes

Immediately flush eyes with plenty of water or eyewash solution, lifting the upper and lower eyelids, for at least 15 minutes. Take immediate medical attention and continue irrigation until medical attention can be done.

If inhaled

Immediately remove to fresh air, keep warm and at rest. Consult a physician afterwards.

If swallowed

Do NOT induce vomiting. Wash out mouth with water and drink 2 – 4 cupfuls of water. Call a physician.

5. Fire-fighting measures

Extinguishing media

Water spray, alcohol foam, carbon dioxide, dry chemicals.

Special fire fighting procedures

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Move container from fire area if it can be done without risk. Water spray may be used to flush spills away from exposures and dilute spills to non-flammable mixtures. Keep run-off water out of sewers and water sources. Dike for water control. Cool containers exposed to flames with water until well after the fire is out. If risk of water pollution occurs, notify appropriate authorities.

Unusual fire & explosion hazards

Combustible but not readily ignited.

Specific hazards

carbon monoxide, carbon dioxide, nitrous gases

6. Accidental release measures

Environmental precautions

Avoid discharge into drains, sewers or watercourses.

Spill clean up methods

Extinguish all ignition sources. Stop leak if possible without risk. Wear self-respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Flush with plenty of water to clean spillage area. Do not let washing down water contaminate ponds or waterways. Inform authorities if large amounts are involved. Cover with sand, earth or any suitable adsorbent material, pick up, transfer to a closed container and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.

7. Handling and storage

Usage precautions

Avoid spilling, skin and eye contact. Do not breathe vapour, mists, and / or dusts from this material. Provide adequate ventilation.

Storage precautions

Store in tightly closed original container in a cool, dry well-ventilated place. Suitable containers: mild steel, stainless steel. Unsuitable containers: copper, zinc, other non ferrous metals.

8. Exposure controls / personal protection

Ingredient comments

No occupational exposure limit assigned.

Engineering controls

provide adequate general or local exhaust ventilation.

Eyes protection

Wear safety glasses and chemical goggles if splashing is possible.

Skin protection

Wear appropriate protective gloves and clothing to prevent skin exposure.

Respiratory equipment

Wear suitable respiratory protective equipment in the positive pressure mode with emergency escape provisions.

Other protection

Use engineering controls to reduce air contamination. Provide eyewash station and safety shower in work area.

9. Physical and chemical properties

 

Appearance:	pale yellow, odourless liquid at 25℃
pH:	7 - 9
Freezing／Melting point (℃):	-2
Boiling point (℃):	Not available
Flash point (℃):	Not available
Specific gravity／Density:	0.926
Viscosity (mPa.s／20℃):	Not available
Vapor pressure (kPa／20℃):	0.01
Auto-ignition temperature (℃):	289
Decomposition temperature (℃):	Not available
Critical temperature (℃):	Not available
Critical pressure (MPa):	Not available
Explosion limits, lower (v/v %):	Not available
Explosion limits, upper (v/v %):	Not available
Solubility in water (20℃):	insoluble
Solubility in other ingredients:	soluble in methanol

 

10. Stability and reactivity

Chemical stability

Stable under normal temperatures and pressures.

Incompatibilities

acids

Hazardous combustion or decomposition products

ammonia, nitrogen oxides

carbon monoxide, carbon dioxide

Hazardous polymerization

Has not been reported.

11. Toxicological information

LD50／LC50

LD50 rat: 1300 mg / kg (oral)

Acute effects

Corrosive to skin. Harmful if swallowed.

Chronic effects

To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

Carcinogenicity

Not available

12. Ecological information

Ecotoxicity

Data not yet available.

Degradability

8% after 28days

13. Disposal considerations

Dispose of in a manner consistent with local regulations.

Disposal methods

Dispose of waste and residues in accordance with local authority requirements.

This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber.

Observe local authority regulations.

Composition

C, H, N

14. Transport information

 

Proper shipping name:	amine, corrosive liquid
Class:	marine pollutant
Packing group:	III
UN No.:	UN 2735
Primary risk:	corrosive
Hazard No.:	8
Remarks:	Shipment permitted

 

15. Regulatory information

Labeling

Dangerous for the environment

corrosive

European information

EC index No.: 276-014-8

Hazard symbols

C	Corrosive substances

Risk phrases

R22	Harmful if swallowed
R34	Causes burns
R50 / 53	Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment

Safety phrases

S26	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S36 / 37 /39	Wear suitable protective clothing, gloves and eye / face protection.
S45	In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible)
S57	Use appropriate container to avoid environmental contamination
S61	Avoid release to the environment. Refer to special instructions / safety data sheets

 

16. Other information

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. Lujing Chemical shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale.

MSDS Creation Date: 03. Dec. 2006

Revision Date: 22. Mar. 2009